Data Management in Marketo

Marketing Rockstar’s Guide to Marketo P a g e | 1
Data Management with Marketo
© 2013. Josh Hill. Licensed under Creative Commons ShareAlike with Attribution http://creativecommons.org/licenses/by-sa/4.0/
Visit http://www.marketingrockstarguides.com for more on marketing automation.
Marketing Rockstar’s Guide to Marketo

Chapter 1. Data Management with Marketo
At a Glance
Overview 3
Deduping Leads 3
Standardizing Data 8
Other Updating Techniques 27
List Management Techniques 28
Chapter Review 50
Recommended Resources 50

Overview
One of the reasons you selected Marketo for your automation needs is its powerful data management tools. With a
few well chosen campaign workflows, you can automatically manage lead records with almost no intervention.
When I did this for managing MQLs and Trial Autoresponders, I saved my team at least 40 man-hours per week. At
$100/hr, I saved $208,000 in value for use on other projects.
So what are you waiting for? That $200,000 is not just going to drop from the sky. Let’s get started.
Deduping Leads
With all the talk about deduping, MS Word still doesn’t know it is a valid word!
When you selected Marketo, you were looking forward to its automatic deduping capabilities, reducing the number
of records in your database, reducing manual merges, and keeping better track of your audience. The reality is
somewhat different because while Marketo can do much of the heavy lifting going forward, dupes still get created.
The good news is there are ways to minimize dupe creation while also automatically merging records.
Marketo’s Deduping Capabilities
While Marketo includes automatic deduplication by email address, it does not do this for records prior to your first
sync or records, which first appear in your CRM. Marketo (and I) highly recommend deduping records before your
first sync to have the cleanest and fastest possible setup. Your SFDC Admin can recommend the best method for
your business and budget or you can follow my suggestions below.
Handling Duplicates
Marketo can automatically dedupe leads based on email address. The dedupe works only when you enter new
leads into Marketo from:
List Import
Marketo Form (iFrame or Marketo Page is ok)
Direct creation in Marketo database.
Direct creation through API.

Thus you should do your best to create new leads using the above methods.
How Duplicates Are Created
Of course, people will always create new leads directly in the CRM. These create duplicate records and there are
specific rules and situations where this happens.
Lead Duplicates
These usually occur in your CRM or because you are not syncing all Leads to the CRM.
Contact Duplicates
An existing SFDC Contact can force Marketo to create a duplicate Lead if
Someone created a new SFDC Lead for that email address.
The Marketo User is not seeing Contacts correctly.
There were existing SFDC dupes of both record types.
Preventing Duplicates
To prevent duplicates, take the following actions:
Always use Marketo Forms or the API.
Sync All Leads to SFDC.
Import all lists into Marketo using Normal.
Train Sales SFDC Users to search for leads first using email or Full Name and update an existing
record.
Handling Deduplication
Marketo offers a few ways to help you dedupe.
Merge in Marketo
If you use the Merge function in Marketo, the Leads are merged. The activities are merged while the Lead Score is
added together. An SFDC Lead will be Converted and attached to an SFDC Contact.
You can also try Marketo’s Easy Merge Tool: (Paid).

Merge in Salesforce
If you manually merge SFDC Leads and Contacts, then the usual SFDC rules apply. In Marketo, the two records are
merged, the Scores are added together. If the winning lead has a field value of NULL, then that field will be NULL
after the merge. Converting a duplicate Lead and attaching it to an existing Contact has a similar result.
The same rules apply if you use a tool like DemandTools for a mass merge.
Stefan Massy at Marketo makes this suggestion:
One suggestion/precaution I would give is when you do the merge in Salesforce ensure that you are logged
into Salesforce with your Marketo sync user. Often times you may be logged in with a Sys Admin (who has
full access) and the merge occurs but the issue may be that your Marketo sync user does not have the same
permission as the Sys Admin user and your merge may not be reflected in Marketo.
Duplicates, Updates, and Email Permissions
A common question is “If I have duplicates of the same email, can that person continue to be sent emails if just one
record is opted-out?”The answer is yes, and no, depending on the situation.
How do I know which record will be updated? Marketo will update the most recently updated record
of any group of duplicate Leads. So if you have 5 duplicates and the Lead fills out a new form with a
matching email, only the most recently updated record is updated.
Duplicate Records Qualify for the Same Campaign
Sending email to duplicates: if duplicates qualify for the same campaign, Marketo checks for email duplicates and
only sends 1 email out. The email activity is attributed to the most recently updated Lead record.
If you have 5 records with the same email address, it is possible for all 5 to qualify for a smart campaign. If this
happens, Marketo dedupes based one email address to send only 1 email per email address.
If one of those email addresses is also opted out, then Marketo will not send any email to that address.
Your Qualified Count and Blocked Count will not match in this situation.
One Record Qualifies, But Others Do Not
If you have 5 records with the same email address (or even the same person with different email addresses), it is
possible only one record will qualify for a campaign.

In this situation, the qualified record could be opted-in, while the others are opted-out, which means the email will
go out.
Unsubscribed on One or More Records
Only the most recently updated Lead record will be unsubscribed and it may be possible to send out email if the
other subscribed records qualify for a campaign. If both an Unsubscribed and Subscribed Lead qualify for the same
campaign, no email will be sent.
Remember that if someone registered with a corporate email and previously with a personal email, those are not
duplicate records to Marketo and it is possible to keep sending that person email on either account.
Solutions
Always setup a standard Smart List and static suppression list that includes all opted-out leads. Be sure to include
this list as NOT IN on all email campaigns to exclude all opted-out leads.
Holding Back Leads from Marketo
Generally, new leads, which enter Marketo, do not automatically sync to SFDC unless implicitly or explicitly told to
do so through a SFDC flow action. I prefer to sync all data, but doing so requires Queues to avoid sending large
amounts of unqualified leads to Sales.
One way to prevent Marketo from re-syncing that group of leads is to remove a value that is required in SFDC. If
Company, for instance is not available, SFDC will reject the insertion.
You could also setup a system where a secret SFDC required field is auto turned on for new leads, but set to OFF for
those SFDC Is Deleted leads unless you decide otherwise. For instance, if one of these old leads comes back to
request something or re-subscribe, then the system resets the SFDC OK field to True, then syncs the lead.
A Deduping Process
Here is my recommended deduping process:
1. Import Lists into Marketo.
2. Merge Records in Marketo using the Duplicate Fields filters.
3. In the CRM, use DemandTools (or a similar service) to identify dupes using fuzzy logic. Break this down by
each territory and ask Sales to check off the master record. Then merge automatically.
4. Individually: ask someone to do this for you. I always Merge Leads first, then attach any duplicate Lead-
Contact pairs to the Contact record.

If you are looking for specific rules over which fields to choose to override, I usually do the following:
Prefer Older Record over newer.
Prefer more complete record to less complete.
Choose the most recently updated field over the older field.
Average the scores (although Marketo adds them).
Use the score of the more recent lead.
Deduping Tools
There are dozens of deduping tools to help you automatically prevent dupes or clean up dupes. Here are my
favorites.
Demand Tools
Demand Tools offers a full suite of options and tools. This is the most popular and most powerful option available to
SFDC users. One of my clients uses Demand Tools so much; they weren’t even uploading to Marketo. I have also
used it to walk through exports of dupes, selecting the master record, and then running a process to merge the
records. The tool has a variety of matching options, including fuzzy logic, to find, capture, and merge dupes of all
types.It handles Leads/Contacts/Accounts and includes the PeopleImport tool to help stop new dupes.
The drawbacks are price and it does not prevent manual dedupes.Pricing starts at $5,000/yr for one SFDC
Admin.Find it on the AppExchange.
ReachForce
ReachForce is becoming wildly popular among Marketo users (even Marketo uses it). Their Data Cleanse service
helps identify dupes, merge them, and then append ReachForce data to records so your database is fresher.
ReachForce also offers a popular Web Form Conversion tool to allow leads to standardize their data before it even
enters the database.
RingLead
RingLead has several options available to Salesforce and automation users. The Marketo integration is available, but
its full features are not listed.DataCleanse seems to have less power than DemandTools, but it is cheaper and an
improvement over native SFDC options.
RingLead Cleanse $999 and up
RingLead Unique Entry Warning (SFDC) $4.99/user-month
RingLead Marketo Integration (you must call for details)

RingLead Duplicate Removal (AppExchange) $999 and up
ActivePrime
ActivePrime’s CleanCRM service cleanses your database of dupes and prepares it for CleanEnter, a pre-entry dupe
catcher for manually created records. They also have additional data services.
Contact: sales@activeprime.com 617-247-9908
Stratus Cloud Solutions
Stratus Cloud Solutions’Data Cleanser suite offers a more powerful manual tool, akin to Salesforce’s Find
Duplicates feature. They do claim cross-object deduping, including for custom objects, so it could be useful for
unique situations. The fee is $1,999/year for unlimited users, but to me, this is expensive compared to what other
tools are offering.
My Recommendations
I recommend exploring Demand Tools, RingLead, and ReachForce to learn more about how they can help you.
Each situation is a bit different and your budget and skills may not warrant Demand Tools. It might be worth
considering a Marketo Dedupe or ReachForce service, if this is a one-time deal. For a long-term solution, you could
try running RingLead’s Unique Entry alongside DemandTools or RingLead Data Cleanser.
Ultimately, a human, possibly an intern, will have to go through the database to help merge records. It is not pretty,
but it will help keep things running smoothly. If you make this a monthly or quarterly practice with your team you
will stay ahead of the game. Some firms hold data cleansing parties once a quarter (with pizza!) where Sales and
Marketing sit down for a day to clean up Marketo and the CRM. You will find it easy to resolve conflicts or data
confusion if everyone is in the same room or GoToMeeting.
Standardizing Data
A common question on the Community is “How do I automatically fix bad data?” A fun and fast way to save time
(or quickly ruin your data) is to use Marketo campaigns to monitor then update data. I will show you a few examples
you can copy or modify to suit your needs.
Please be careful with these powers as you can easily change Leads and Contacts, which may affect reporting or
Salespeople. I recommend modifying SFDC Leads only in most cases until you feel comfortable making other mass
changes.

Country Name Changer
If you have a database, you likely have all sorts of values in your Country and State fields. Even if you enforce ISO
Country Names, your old forms may not. Your sales team may still be able to type in what they want. The same is
true for full state names versus abbreviations.
Adjusting Existing Country Names
The first, best way is to ensure there are few ways for bad data to enter these fields. To make this happen, work with
your CRM Admin to set Country and State values to the ISO list provided below. Make sure you cannot manually
enter data into that field in your CRM.
For the automatic flows, you may want to choose the most important countries or errors to correct. E.g.:
UK United Kingdom
USA for US or United States or United States of America
And for similar combinations.
Step 1: Create a New Campaign Called “Country Name Changer”
You would place this in a folder called Data Management or Standardizers.
Step 2: Smart List
There are two choices here: Batch or Trigger. I tend to prefer Batch campaigns for this work because I
can periodically go to see the next run’s count that will tell me if other data cleaning efforts are
working. With a Batch campaign I can also reduce the overall load on the system.
You will have to review a list of leads to see the common misspellings or errors to make this work.
Every database is a bit different.
Option 1: Trigger with
Data Value Changes: Country
Option 2: Batch with a Smart List like:
Country IS NOT Empty
Member of Smart List IN Mistyped Country Names

Step 3: Flow
Change Data Value:
Choice 1: If Country IS (USA, United States, U.S.A) then New Value
of Country IS US
Choice 2: If Country IS (Singapura, Singapore, Spore) then New Value
of Country IS SG
Choice 3…
Default: Do Nothing

In this type of Flow, you can have multiple options. You may want to restrict a campaign to a specific
continent or region to reduce the overhead and choice list as more than 7 choices slows down
Marketo’s display engine and processing.
Step 4: Schedule
Run Every Time
Schedule Recurrence at 2:15am each night.
(Or Activate if you set this as a Trigger)

Filling in Blank Country
You may also encounter Lead without Country or State filled in. Your Forms may not force these values; your list
import from that Trade Show may have missed it; or SFDC is not enforcing this value. In any case, you probably
want to know a Lead’s geography as early as possible to improve routing and messaging. The good news is you can
enhance these Leads with Data.com or Marketo’s own Inferred Fields based on IP address data.
Step 1: Create a New Campaign Called “Blank Country Fixer”
Step 2: Smart List(s)
There are a few ways to match Inferred data to actual values. I recommend creating several Smart Lists
in the Lead database before placing them into the Campaign itself.
Blank Country in Canada
In this list, we want to find leads who are likely in Canada. This list uses both State matching and
Inferred Country to find possible Canadian leads. Notice we are also careful to exclude US
States, which we could do with Inferred Metro Region or other fields if needed.

Blank Country in US
In this case, we want to select Leads whose Country IS EMPTY and who have an Inferred
Metropolitan Area (this is US only) which we can use later to determine if they are in the US.

For this example, we will create several Smart Lists like the above and place them into one Campaign.
For efficiency, I have taken in as many of the blank Country smart lists as possible since I know each
one will match the right country during the Flow.

Note how we included leads where Inferred Country IS NOT EMPTY to ensure we can
match values.
Step 3: Flow
The Change Data Value flow step is our workhorse here, taking in the various Smart Lists and making
a quick Country change based on that list. One version of this Flow handles just specific Smart Lists.

Another version of this Flow takes the Inferred Country value as a token to insert in the
Country field if the Lead did not match the other 4 better defined Country Smart Lists.

Step 4: Schedule
Qualification Rules: Once
Schedule Recurrence: Daily at 3:00am

You can also clone this campaign to create a State/Province version or even to help fill in possible Area
Codes. If you are selling other internet services, you can easily use the Inferred ISP as part of your messaging.
State Changer
The State/Province Changer operates in the same way as the Country Changer. This is useful if parts of your system
are not enforcing ISO State Codes or your preferred data values.
Step 1: Create a New Campaign Called “State Standardizer”
Step 2: Smart List
Use an existing Smart List or set the filters like this:
To Convert Full Name to Abbreviations:
State IS (Delaware, New York, …)

State Contains (N.Y.; Delawa;Penna;Calif;…)
To Convert Abbreviations to Full Name
State IS (PA;MD;NY;NE;…)
State STARTS WITH (NY;NJ;CA;WA…)
Step 3: Flow
Change Data Value
Choice 1: If State IS (New York, N.Y.) then New Value IS NY
Choice 2: if State IS (New Hampshire, N.H.) then New Value IS NH
In the example below, we match on full State name, then adjust the value to the ISO State Code.

Step 4: Schedule
Qualification Rule: Every Time
Schedule Recurrence: Daily at 2:30am
Picklist Changes: Employee Count Updates (old to new)
Occasionally picklist values may change for reporting purposes or other business needs. One change is to modify the
reported Employee Range. Since territory and priority decisions are often made on this field, getting it right is
important. (You can use this example for any field).
In this example, we want to migrate our Employee Range field to a new picklist:
Old Value New Value
1 – 12 1 – 50
13 - 69 51 – 999
70 – 350 51 – 999
Best Practice: Stagger
batch campaigns working
on the same field so
subsequent flows catch
the missed leads from the
earlier ones.

351 – 1299 51 – 999
1300+ 1,000+
Since the ranges do not match up, you will have to make a decision to set the new value of Employee Range as close
as possible. In this example, I chose the lowest range. Thus, 13-69 becomes 1-50 and 351-1299 becomes 51-
999.
If you also have a separate field for Number of Employees with an actual staff count, you can set leads who have
this value to the correct Employee Range more easily.
Step 1: Smart List Setup
You will need several smart lists to help drive 3 or 4 campaigns to catch all the possibilities.

Step 2: Create a Campaign Called “Employee Count Changer”
Place this under the Data Management folder.
You will also need additional campaigns if you have multiple employee fields and need to adjust the
new Employee Range properly.

Step 3: Smart List
Step 4: Flow
To take the Num Employees field as a basis for the Employee Range, run this Change Data
Value flow.

Step 5: Schedule
I usually schedule these as Batch Campaigns to run at 1AM because the initial run will be thousands of
records while future runs will include very few leads because we changed the picklist values on the
Forms.

Lead Source Standardizer or Changer
Another common need is to correct or standardize Lead Sources because this field drives much of your reporting.
Errors can creep in from a poorly maintained SFDC picklist or poorly supervised Marketo Forms. You may also
need to regroup Sources as marketing techniques change.
To mass update Lead Source values correctly requires building a careful mapping from the Old Value to the New
Value. Your SFDC Admin can usually do this migration for you, but what if you don’t have access to one? That’s
where Marketo comes to the rescue.
Step 1: Create a New Campaign Called “Lead Source Standardizer”
Step 2: Smart List
Again, you could run this as a Trigger or a Batch Campaign. In this case, we want to correct errors
immediately.
Any time a Lead is Created from a List Import or from Salesforce (where our errors occur),
Marketo will see if that Lead’s Lead Source matches common errors in the Lead Source
Mapper List.

Step 3: Flow
In this example, we know common Lead Source value errors, so I made a few Choice steps to match
and then Change Data Value to the proper Lead Source.
Your Default Choice should always be Do Nothing otherwise you risk overwriting data
incorrectly

Step 4: Schedule
Qualification Rule: One Time
Schedule: Active
Other Updating Techniques
Using Import List to Update/Overwrite
One drawback of an automatic mass update to US State or Country codes is the sheer volume of Choices which
make Marketo slow down. I usually recommend setting up a Country or State Standardizer for specific groups of
misspellings only after you’ve fixed 98% of the problem. The fastest way to update all erroneous records in Marketo
is to upload a list to overwrite the existing data.
In many CRMs, just as in Marketo, you can update or replace data if you have the unique record identifier and one
or more fields to change. In Marketo, the unique identifier is Email Address.
Step 1: Check if Desired Field(s) are Field Blocked for Imports
If so, check with your Admin about exceptions. If the field is not blocked, then it can be overwritten
using this method.
Step 2: Create a List or Smart List to Pull the Right Leads
Step 3: Export Leads with Desired Fields
Use the XLS button at the bottom. Try to only export the minimum number of fields using the Views
button.
Step 4: Open the Spreadsheet
Open the spreadsheet, then remove any extraneous columns you do not plan to update.
Step 5: Use the Filter Tool to Select and then Modify Values
Be sure to avoid changing Email Address.
For instance, if you were migrating a newsletter list from another system, you could update the
Unsubscribe values to reflect the newer preferences. Unsubscribe is a True/False fieldso
setT=1 or F=0. (either is fine) Other fields like Country will require the appropriate value.

Step 6: Delete Unneeded Fields
Remove fields you do not plan to update, if you did not already.
Step 7: Save the File as CSV
Step 8: Import List as Normal
Doing this will overwrite any fields you left in the CSV import file. It will not change any other fields
on existing records if you did not import those fields.
Step 9: Verify Results with the Static List or a Smart List
Using Salesforce to Update Records
A few times I pointed out that Salesforce could also perform some of these data adjustments for you. Usually this is
easier if your SFDC Admin has access to list import tools such as Demand Tools. You can also try the following
techniques if you are feeling bold:
List Import using the SFDC Import Wizard: it is best to export an original list with the
Contact/LeadID code, the Email Address, and the field(s) you want to change. You can then re-
import that list with the adjusted field values. This will work unless field blocking was set for that field
(or if you don’t have permission). You can export this list using Marketo too.
Demand Tools: have your SFDC Admin help.
Mass Backend Update: again, your SFDC Admin can help here.
List Management Techniques
Early on in Marketo training they recommend creating various standing lists, such as All Clients, EMEA
Clients, Prospects, Unsubscribed, etc. You can also create corresponding Static Lists for each group
in addition to using Static Lists as import tools. And then there are Segmentations, which are much faster and more
versatile as personalization tools. Here we will go through some of the common techniques for using each type of
list.

Standing Smart Lists
Standing Smart Lists are your all purpose tool for making things happen in Marketo. I often say Smart Lists “drive”
many automatic campaigns because of their dynamic nature. Smart Lists are simply database query instructions
which are always active. Because they are dynamic, that is they tell you the count of Leads who currently match the
criteria, they are always shifting their membership. Smart Lists can be used in many ways:
Lead count.
Quick reporting.
Constraint Reports.
Add a Custom Column to a report.
Drive scheduled Batch or Trigger campaigns such as scoring or nurture.
Drive Leads to Static Lists
Let’s take a look at how to do each one.
Lead Counts and Quick Reports with Smart Lists and Lists
To satisfy your reporting needs, use a Smart List to gather the data you need. The myriad filters can pull numberless
combination of things from a simple “How many leads are in the Database?” to “Who filled out Page A on
December 31, 2012?”
Here are a few examples:

Constrain a Report with a Smart List
Smart Lists can be used inside Leads by Reports to focus the report on a particular group of leads.

Custom Columns and Smart Lists
Smart Lists can also be used as Custom Columns in Leads By Reports to show a specific sub-set of Leads who meet
both the Report criteria and the Smart List criteria. It’s like a cross tab. In this example, of 352 Website Form Leads,
only 18 were Qualified.

Static Lists
Static Lists are best known as the way you import leads. They can also act in a variety of ways to help you manage
your database:
Faster Lead Count and Reports. In the last section, we saw how Smart Lists and Smart Campaigns
can auto-populate Lists for faster counts and processing.
Error Check Imported Lists. It is a good idea to keep Static Lists you use for import and that each
import has its own list. This way you can identify groups of leads easily in case of an error.

Drive Nurturing Campaigns. Lists are commonly used to manage nurturing and traffic cop programs
because they can be temporary holding pens for leads. We’ll talk more about this in the Nurturing
Chapter.
Static List Populator
The Static List Populator is a great alternative to Segmentations because the list count is instant, allowing you to
count leads as well as run campaigns much faster than relying on Smart Lists. To get this system working, you need
to map out the lists you need regularly. Possible uses include:
Regional list counts.
Newsletter Subscribers, etc.
Opt In/Out Management
Product Interest Lists.
More granular lists than Segmentations permits.
You need more than 20 Segmentations or 100 Segments.
Step 1: Create the Needed Static Lists
Step 2: Create the Required Smart Lists
You may already have these.
Step 3: Create corresponding Smart Campaigns.
Usually I prefer one campaign for each smart list. You could also collect them by Type, such as
Region – Add to List. Make sure to name the campaign and list similarly.

Step 4: Smart List
Trigger Version: use Data Value Changes to place an Industry Lead into the right list.
Batch Version: use Member of Smart List each night to Add to List.
or for multiple lists at once:

Step 5: Flow
Add to List will do nicely.
or for multiple lists:

Step 6: Schedule
Again, these are best as Batch campaigns. An alternative is to run a Trigger based on a field change.

Segmentations and Segments
Segmentations are special database tools which allow you to rapidly define groups of your database for various
purposes, including Dynamic Content. You must use Segmentations to take advantage of the Dynamic Content
features of Marketo. Essentially, a Segmentation is a high level category of your database, broken down into
Segments which are the sub-categories. Marketo says “A Segmentation in Marketo refers to your target
audience…Segments that define unique groups with that target audience.” This should help:
Segmentation: Industry
Segment: Aerospace
Segmentation: Region
Segment: Americas
Segmentation: Function
Segment: Default (or “other”)
Segmentations apply to all Leads. A Segment will apply to only some Leads based on the criteria chosen. If a Lead
does not match a Segment, it is placed in the Default Segment for that Segmentation.
Since Segmentations apply to all Leads, whenever a Lead qualifies for a Segmentation’s Segment, it will join it
automatically.
Why use Segmentations instead of Smart Lists? Segmentations are much faster than Smart List counts. Even with a
Cached Smart List, a Segmentation is much faster. It’s more like a dynamic Static List. You can also check Segment
changes or use in Flows more rapidly. And finally, Segmentations enable Dynamic Content generation, which
speeds up your ability to send out the right message at the right time to the right person.
Things to Know Before you Begin:
Limits: 20 Segmentations with 100 Segments each. That is 20 Segmentations for all Workspaces.
Rules: Segments use Smart Lists to create hard coded groupings for dynamic content. Choose these rules carefully
because they define the Segment and the first time a Lead qualifies, it joins the Segment forever.
Priority Order Determines Segment Membership:
Best Practice: use
Segmentations for major
database divisions like
Region, Product Interest,
or Function. Use other
Lists for more granular
divisions.
Warning: You are limited to
20 Segmentation each with
100 Segments each, across
all Workspaces.
Warning: a Lead can only
belong to 1 Segment: the
first Segment it qualifies for
or the Default Segment.

Leads in the database belong to ALL Segmentations, but will only qualify for 1 segment in each
Segmentation.
The FIRST segment the lead qualifies for (based on priority order) is the one that it belongs to. The
Lead can no longer join other segments.
If it does not qualify, it joins the Default Segment.
Create a Segmentation
To create a Segmentation, follow these steps. In this example I will create a Region Segmentation to group Leads by
Americas, EMEA, and Asia.
Step 1: Go to the Lead Database
Step 2: New > New Segmentation
Step 3: Add Segments
Press Add Segment and name each segment as shown.Note: Default Segment
cannot be deleted.

Step 4: Adjust Segment Priority Order
Make sure you have the priority correct. The Default Segment has the lowest priority at all times; it is
the catchall. The Priority order is less important for geographic adjustments, however, for a
Segmentation like Employee Ranges or Business Type, you might have to use a waterfall approach to
ensure borderline Leads are in the preferred spot.
Step 5: Press Create.
Now the Segmentation is available to edit.

Step 6: Define Each Segment
Select the Segment, then use the familiar filters to define each Segment. For Americas, we will use the
filter Country, then copy in the countries in the Americas. You can use my handy ISO Country List
for a premade list of countries for Marketo.
Each Segment looks very similar to a Smart List, except that it will become a permanent fixture of
your database.
Americas Segment:
Copy a country list.

Paste it into the Country filter:

Asia Segment

EMEA Segment
Now you see the Rules for each Segment in the Segmentation.

Step 7: Approve the Segmentation
Once each Segment’s Rules are defined, you can go to Segmentation Actions > Approve
to make this available across the system.

Approval activates a process to move each Lead into one of the three Segments, or the Default
Segment.
Edit a Segmentation
To Edit a Segmentation to Add or Delete Segments, you must create a Draft version, make changes to the Draft, and
then re-approve the Segmentation.
Changing an existing Segmentation can have adverse effects on your active Programs or Campaigns. During the re-
Note: Approved Segments
are Read Only. You can
Rename a Segment.
Warning: deleting a
Segment will also
permanently delete
associated Dynamic
Content from all assets.

approval process, the content a Lead receives may vary from your intentions. Deleted Segment’s content will also be
deleted if you were using Dynamic Content.
You can edit the following components of a Segmentation in Draft Mode:
Segments
Segment Names
Priority Order
Segment Rules
Add Segments
Delete Segments
Remember to Re-approve your Segmentation when complete. Also remember to adjust campaign flows that rely on
your Segmentation.
Delete a Segmentation
You can delete a Segmentation. Deleting it does not affect the Leads inside, just like deleting a Static List has no
effect on the actual Leads. To delete the Leads, you must do a few key checks:
1. Remove the Segmentation or Segments from any dynamic content. Check the Used By tab to find out which
assets are using this Segmentation.
2. Unapprove the Segmentation.
3. Delete the Segmentation.
There is no going back, so be sure you want to do this!
Other Segmentation Tips
Using In Smart Listsor this article on Segmentation Filters and Triggers.
Sharing in Workspaces – it’s better to use the Segmentation in the default Workspace.
Maximum of 25,000 Dynamic Content Variation per Asset: if you use too many variations in an asset, Marketo will
show an error. Use the formula: (Number of Segments in Segmentation 1) x (Number of Segments in Segmentation
1) x … to see if you will hit this number.

Chapter Review
Self-Quiz
Why use Marketo to automatically adjust field values?
How can you stop values from being overwritten?
When will Marketo create a duplicate record?
Recommended Resources
Marketo Documentation
SFDC Lead is Deleted field
Removing Leads in Marketo that are SFDC Deleted
Deleting in Marketo, does not delete from SFDC and Marketo will sync back later, UNLESS the Marketo SFDC
User cannot see certain leads.
Deduping with Marketo
Force Marketo to Update using SFDC
Dynamic Content

Dynamic Content in Emails
Dynamic Landing Pages
Segmentations Tutorial
Reporting on Segmentations
Marketo Community
How to Hide Leads from the SFDC Marketo User
Hiding Leads in Marketo
Delete Leads in Marketo, Keep in SFDC
Tools
Country and State ISO List
DemandTools
ReachForce
RingLead
ActivePrime
Stratus Cloud Solutions
Marketo Easy Merge

Data Management in Marketo

More Related Content

What's hot

Similar to Data Management in Marketo

More from Josh Hill

Recently uploaded

In this document

Data Management in Marketo