From the course: PLC Simulation Software: Factory I/O with Connected Component Workbench

Unlock the full course today

Join today to access over 24,900 courses taught by industry experts.

Filling a water tank project

Filling a water tank project - Ladder Logic Tutorial

From the course: PLC Simulation Software: Factory I/O with Connected Component Workbench

Start my 1-month free trial Buy for my team

Filling a water tank project

“

- [Narrator] This project includes using the scene from Factory IO to fill an empty tank, using a timer. I have provided you with the scene file. You can find it in chapter five folder. For this project, I'm going to write a latter logic program following these steps. When pressing on the fill push button, a timer starts and the fill valve is open for 15 seconds. The time is showing on the display. When the time is done, the fill valve closes. Then, when we press on the discharge push button, the discharge valve is activated, releasing the water out of the tank. This is a demonstration of the project showing the valves, the tank, and the Control Panel in the Factory IO scene. And, also, I'm using a PLC simulator from Connected Components Workbench software. Here is a list of the inputs and outputs for this project. You can also see them in Factory IO by going to File and Drivers. And here's a list of the inputs and…

Contents