From the course: Creating Concrete Buildings with Revit Structure
Join today to access over 24,900 courses taught by industry experts.
Configuring sloped concrete framing
From the course: Creating Concrete Buildings with Revit Structure
Configuring sloped concrete framing
- [Instructor] So it seems as though we have a pitched roof. The objective of this video is to place a slab on our pitched truth, and then pitch our slab to conform with the framing. To get started, let's jump into Revit. Under models, let's go open. Let's grab SlopedSlabs, click Open. In the project browser, under structural plans, let's go up to the roof level. On the structure tab, let's click on floor. Let's select floor, 6-inch concrete. And for our offset, we can give that a 0, if there is an offset on there. There we go. On the draw panel, let's make sure we select pick supports. I'm going to pick this support here, this support here, this support here, and then this support here. On the modify panel, let's click trim, extend to corner, or type TR for trim. Select this line, select this line, select this like, select this line, then this line, to this line. Hit Escape a few times. Let's click on…
Practice while you learn with exercise files
Download the files the instructor uses to teach the course. Follow along and learn by watching, listening and practicing.
Download courses and learn on the go
Watch courses on your mobile device without an internet connection. Download courses using your iOS or Android LinkedIn Learning app.